5" Advanced Touch Screen
In new generation tray sealers, the packaging process is carried out “in-line” from start to finish. The transport system moves the trays along in a very gentle fashion, suitable for (semi) liquid filled trays. The machine below has side-gripper-arms to transport of trays in and out of the sealing station.
Tray sealers apply a top-film to a tray. An integrated part of the machine – often a de-nester – is used to un-stack the empty trays. After the trays are filled with product they are sealed by applying the film. Finally, the sealed tray is moved to the next step, most likely secondary packaging.
1. Seal film Wind/Unwind system: The sealing film is fed to the sealing station with the exact length and the right tension.
2. Tray In-Feed system: Feeding and positioning of the filled trays.
3. Tray Out-Feed system: Sealed tray out-feed to secondary packing station.
4. Tray transport Linear system: Servo belt-driven linear motion for smooth in and out-feeding of trays to the sealing station.
5. Sealing Station: The main process where the top-film is sealed onto the tray.
We are able to supply all the automation products for tray sealing machines, including the logic and motion or hybrid controller.
A: Optimum temperature control for sealing
We can also provide all motors, drives, position sensors, safety devices, temperature sensors and other panel components. All are easy to integrate and carry the famous Omron mark of quality and reliability. Temperature Control during sealing is critical. At each seal the mould drops in temperature and fast recovery is essential to reach high throughput. Omron’s unique 2-PID control with built-in auto-tune optimizes the system for fast disturbance response, perfect for applications like sealing. Another benefit is fast start-up, giving perfect seals right from the first tray.
B: Programmable safety
Without compromising machine performance, Omron delivers flexible and independent functional safety. The NE1A system makes this both modular and flexible. Safety slaves can be added, also to other machines in the production line, and then be integrated with a single fieldbus into the safety controller.
C: One sensor for all tray types
E32/E3X fiber and amplifier can detect all tray types with one model. Teach one set on each new tray and reuse the parameters found in the other. Distribution of the parameters can be done using the machine controller or the HMI over the connected fieldbus.
D: Smooth operating servo system
The lift system in the sealing station can be driven in several ways. The benefit of a servo driven lift is less vibration and noise, making it possible to use machines in non-conventional ways such as being elevated above the factory floor. A servo system can also be modified easily during operation.
5" Advanced Touch Screen
Born to Drive Machines
Machine Automation Controller - NJ5 Series
Machine Automation Controller - NX1
Discover a better way to understand traceability in manufacturing
In the food and beverage industry, packaging is responsible for many things: grabbing the consumer’s attention, differentiating the brand, and describing EXACTL...
Omron's automation solutions are explicitly matched for converting applications such as automated slitting, coating, laminating and printing machines