ER6022

Rope Pull Emergency Stop Switch

Tabs

  • Rope spans up to 80 m (262 ft.) means fewer number of switches required per application
  • Contact arrangements of 2 N/C + 1 N/O, 3 N/C + 1 N/O or 2 N/C + 2 N/O
  • IP67 (NEMA 6) enclosure to withstand water washdown cleaning
  • Reset button
  • Indicator beacon in 24 VDC or 120 VAC,

Overview

CE_TUV_UL-CUS.jpg

Conforms to IEC947-5-1, IEC947-5-5, EN418, UL508, BS5304, UL and C-UL listed, TUV certified

  • Rope spans up to 80 m (262 ft.) means fewer number of switches required per application
  • Tension indicator makes system setup and rope tension maintenance easy
  • Contact arrangements of 2 N/C + 1 N/O, 3 N/C + 1 N/O or 2 N/C + 2 N/O
  • IP67 (NEMA 6) enclosure enables the ER6022 switch to withstand water washdown cleaning
  • Reset button—the blue reset button must be pushed in order to return to “machine run” condition following switch actuation by a pulled or slacked rope
  • Indicator beacon—the optional dual indicator beacon, available in 24 VDC or 120 VAC, can be wired to flash red to indicate a tripped switch or glow a constant green to indicate a properly reset switch
  • E-stop button—the ER6022 has two mounting positions where the optional E-stop button may be installed; the E-stop button may be added or replaced in the field
  • Rubber bellows contain UV inhibitor making the switches suitable for outdoor applications

Operation

ER6022_Operation_OEI.jpg

Request for Quote

Complete the form below and we will be in touch.

Lifecycle Stage