ER6022-SS

Stainless Steel Rope Pull Emergency Stop Switch

316 stainless steel die-cast housing and stainless steel hardware for wash-down cleaning and cold applications to -40° C

Tabs

  • Rope Spans to 100 m (328 ft.)
  • IP67 (NEMA 6) enclosure
  • Long life designed for a minimum of one million actuations
  • Integral optional E-stop button

Overview

CE_TUV_UL-CUS.jpg

Conforms to IEC947-5-1, IEC947-5-5, EN418, UL508, BS5304, UL and C-UL listed, TUV certified

  • Tension indicator maintains the proper rope tension
  • Contact arrangements of 3 N/C + 1 N/O or 2 N/C + 2 N/O
  • IP67 (NEMA 6) enclosure withstands water wash-down cleaning
  • 316 stainless steel cast housing and stainless steel hardware
  • Reset button — the blue reset button must be pushed in order to return to “machine run” condition following switch actuation by a pulled or slacked rope
  • Vibration tolerant — the snap-acting switch contacts protect against nuisance tripping due to vibration
  • Indicator beacon — the dual indicator beacon is optional on the ER6022-SS; the indicator beacon can be wired to flash red to indicate a tripped switch or glow a constant green to indicate a properly reset switch
  • Optional E-stop button — may be added or replaced in the field
  • Rubber bellows contain UV inhibitor making the switches suitable for outdoor applications
  • Extreme Cold Version — for applications down to -40°C

Operation

XER6022-SS_Operation.jpg

Request for Quote

Complete the form below and we will be in touch.

Lifecycle Stage